If you add a subwoofer to an old speaker, the bass will sound much better. But if you don’t know much about audio tools, the process might seem hard. In this guide, we’ll show you step-by-step how to connect a subwoofer to an old amplifier. With these steps, you’ll soon be able to enjoy your favorite songs with deep, full bass.
Contents
Stereo Subwoofer Types
When it comes to home audio subwoofers, they may be powered/active or non-powered/passive. A low signal is amplified by a built-in speaker amplifier, power supply, and crossover in powered subs.
They are one of the most regularly used and connect to the receiver through an RCA-type input connection. On the other hand, passive subs are just subwoofer speakers housed inside the bass enclosure. This is directly connected to the speakers or an internal bass crossover. These are uncommon.
Subwoofers can either have the main driver facing forward or on the bottom of the subwoofer. It performs best when the front-firing subwoofer is situated closer to the primary speakers.
A stereo sound system must have speed, clarity, and exact intonation of individual tones. Forward-firing engines create significantly more of them than down-firing engines. As a consequence, the bass will sound quick and forceful.
Ported subwoofers are those that have ports that go directly to the interior. Subwoofers with no ports are referred to as sealed subwoofers. The most often utilized subwoofers are sealed because they are less expensive than ported subwoofers.
Aside from pricing, the difference between them is in sound quality. Sealed subwoofers provide an even, controlled sound, but ported subwoofers may produce more volume. Sealed subs are great for home theaters because they improve sound quality in a small space.
Most subwoofers need an RCA cable to your amplifier and a wall socket for power. Wireless subwoofers are more expensive and usually only work with the same sound system. Subwoofers differ in sound quality, wattage, frequency range, equalization, and connectivity.
If you’re looking for a new subwoofer, you can find several good ones for around $1,000. If you’re on a tighter budget, try for the best subwoofers under $500 since you may still find some great offers here.
How Do They Work?
A subwoofer is an amplifier that makes bass and sub-bass sounds. Subwoofers have one or more woofers inside a housing made of high-quality wood that can withstand pressure and not bend.
Subwoofers can pick up sounds that humans can’t hear. This is different from regular speakers, which can play a wide range of frequencies but don’t have bass.
High-quality subwoofers may reach as low as 15-16 Hz, although humans can only hear at 20 Hz. Subwoofers are never used alone since they expand the range of loudspeakers that cover higher frequency bands.
Subwoofers are linked to a receiver or amplifier. The receiver transfers low-frequency signals to the subwoofer through an electrical current. This frequency varies between 20 and 100 Hz, and the lower your sub descends, the stronger the bass sound effects will be heard.
The current is then amplified and converted to a sound frequency by the subwoofer through a magnetic coil, causing the driver to vibrate. This vibration causes the right sound waves to exit the driver through its output.
Because these low bass or sub-bass impulses are not directional, users may position the subwoofer anywhere they wish. The sound works best with a subwoofer when it deflects off anything. You won’t be able to tell where the bass is coming from or where the sub is when it’s on. You may move your subwoofer around until you find the perfect place for your desired sound quality.
A crossover in the signal channel filters the bass out of the signals driving the main speakers in passive subs. Subwoofers that extend bass without filtering will not increase the power of the main speakers. The motorized subwoofers already have a crossover that you can adjust to change the frequency. This simplifies interaction with the primary speakers and automates line-level output filtering.
Low, mid, and high frequencies are the three speaker levels of sound. A bass guitar or drum, for example, can make a low-frequency bass note. A singer’s voice or a guitar can make a middle frequency sound, and other instruments can make a high-frequency ringing or clashing sound. Subwoofers clean the speaker by separating low- and high-frequency sounds.
If you want a great subwoofer, go no further than the SVS PB-1000, which combines quality, durability, and pricing. Several excellent subwoofers are available that may significantly improve your home theater experience.
Old Amps vs. Modern Receivers
If you’re considering using a subwoofer with an amp, you may wonder if an older or modern technology performs better. The solution isn’t entirely straightforward. Several things determine the sound quality produced by a subwoofer with an amplifier.
For example, if you already have an old, working receiver, you will likely wish to make it work again. You should be able to connect it to the subwoofer. However, the sound quality may be lesser than desired.
You may also purchase new or antique amplifiers. The older ones will surely be less expensive since you can get them at any thrift shop or yard sale. Connecting a subwoofer to a vintage amp also evokes feelings of nostalgia.
But there is always a chance of something going wrong when buying used things. This is more likely to happen with older amplifiers, so verify the amp before purchasing. If there is a problem, ensure sure it is repairable. Modern receivers are 10 times more expensive, but they’re less likely to have been damaged and often come with a warranty.
Vintage amplifiers outlast newer ones in terms of longevity and service. A vintage amplifier can be repaired by changing capacitors, resistors, diodes, transistors, or circuitry.
Vintage receivers seldom need maintenance since they were built to endure a long period. This is not the case with most current receivers unless they are quite expensive. When a modern amplifier fails, you will almost certainly need to replace it rather than fixing it.
The decision between old and new may also be influenced by how you want to utilize the amplifier. Most older amplifiers feature tuner, tape deck, aux, and phono inputs. The first three are line-level inputs for CD players or MP3 players.
The phono output is only available on older versions since it was formerly utilized for turntables. Because it does not have a line-level output, the cartridge signal must be boosted and lined via a phono preamp. With the rising usage of CD players, current amplifier manufacturers seldom include a phono preamp.
How to Connect a Subwoofer to an Old Amplifier
There are a few things you should look at before connecting our subwoofer to the old amplifier. To begin, make sure your subwoofer includes high-level inputs and standard RCA cables connections.
Also, ensure that your receiver can play both the main and remote/speakers A and B outputs simultaneously. All of them have benefits after you’ve completed the setup procedure. Here’s how to connect your old amplifier to your subwoofer.
How To Hook An Active Subwoofer To An Old Amplifier
Some older amplifiers will provide different outputs than newer ones. Many will have a straightforward mono output. Locate the corresponding port on your subwoofer and utilize it as the signal source from the sub to the amp. It’s a nice old feature that works with subwoofers without a hitch.
But some older amps don’t have these ports, you might have to get creative. To begin, your amplifier requires a few components.
To play sets A and B simultaneously, it will need two speaker outputs. In contrast, an active subwoofer requires a high-level input option.
If your amp and sub have all of these features, you’re good to go. Set the amplifier to A to connect to your standard speakers. The B line should be linked to the high-level input of your subwoofer. When you play them both simultaneously, you should notice an increase in bass.
Most amplifiers even include indicators for where you should connect your subwoofer. The B line is often labeled “subwoofer output.”
It’s even simple to turn off. Turn off the B channel on your amplifier.
How To Hook a Passive Subwoofer To An Old Amplifier
Passive subwoofers are significantly easier to connect to older amplifiers. Passive subwoofers have ports that let you hook them up before the speakers.
To connect the passive subwoofer to the amp, just treat it like a speaker and plug it straight into the speaker ports.
How To Connect Your Stereo System to A Subwoofer
If you accomplish this properly, you will be able to improve the sound of your complete speaker system. A subwoofer can improve the sound of an audio system in more ways than just adding more bass. It will make the system sound more pronounced and complex. However, the actual task of linking the two differs somewhat.
To build this connection, there are no bass management options. The high-input connector on the subwoofer will be utilized for this. Connect the speaker outputs from your sub to your stereo using the output connectors. This doubles the connection and gives your system the full subwoofer impact. This comprises the bass, middle, and treble ranges.
Connecting a Subwoofer to a Vintage Amplifier Without an Out
Some antique amplifiers may not have a subwoofer output. It is still feasible to connect your subwoofer and amplifier in situations like these. Depending on the manufacturer, the amplifier should feature a preamp or pre-out labeled “Preamp” or “pre-out.” A Y adapter is required for subwoofers with just one RCA input.
If your amp lacks an output designated, you may still utilize your subwoofer as if it were another speaker. Connect the subwoofer to the speaker output using speaker cords. You’ll have to connect the front-right and front-left speakers to your sub.
What The High-Level Signals Do To Your Connection
When linked through its high-level signals, the subwoofer will view the same signal as the other receiver. There is no latency. The sub-signal may not be as tightly synched when you connect it through an RCA output connection. Therefore you may have some time lag.
The little decline in hearing quality is almost inaudible to most people, but it may be highly annoying to experts. If identical sounds were replayed, even novice listeners would notice a difference.
In terms of dampening and tonal balance, connecting your subwoofer to your speakers sends the signal at a similar frequency. Thus, both objects simultaneously emit bass, masking any latency to the human ear. Syncing is vital while recording music in a studio.
Your subwoofer should sound better when connected to a vintage amplifier or receiver. My nostalgia for vintage amplifiers is triggered by music.
Relevant posts:
- How To Connect Subwoofer To Soundbar?
- How To Connect Subwoofer To TV
- How To Make All Speakers Work On Surround Sound
FAQ
How do I connect my subwoofer to my stereo amp?
Connect your powered subwoofer’s right-side high-level input to the back of your two-channel stereo amplifier receiver’s right-side speaker B output.
Can RCA cable be used for the subwoofer?
Any single standard RCA or subwoofer cable will suffice. However, if the RCA/sub connection is causing hum in the sub, you should consider using a “shielded” subwoofer cable. One subwoofer/RCA cable end should be hooked into your receiver’s Subwoofer Output.
How do you hook up an amp without an RCA jack?
There are almost three ways to connect your amplifier without utilizing any RCA connectors.
- Join the speaker wire to the RCA adapter.
- Using High-Level Amp Inputs, install.
- Connecting an Amplifier Using a Line Output Converter (LOC)
Why do subwoofers have left and right inputs?
Consider it analogous to employing a Y splitter to separate two distinct pathways but in reverse. This is accomplished inside the receiver. The proper sound may now be routed to the subwoofer since the left, and right signals have been merged into a single channel.
Conclusion
Connecting a subwoofer to an old amplifier is one way to improve the sound quality of your music. This can boost the bass frequencies, making for a fuller, richer sound. Thanks for reading!
